2.10 Warranty
The full warranty terms are included in the sales contract.
The conditions set forth in the sales contract (if different) have priority over the contents of this section.
The warranty is subject to the following general conditions:
• opening of the packages by using suitable devices and being careful not to damage the system;
• installation and start-up must be carried out in the presence of qualified and adequately trained technicians, according to
the requirements provided herein;
• the machine must be used within the limits declared in the contract and specified in the technical documentation;
• maintenance must be carried out within the times and in the ways indicated in the manual, using original ARS S.r.l. spare
parts and assigning the operations to qualified personnel;
The warranty shall be rendered null and void in the event of:
• failure to comply with the safety regulations;
• failure by the user to request any authorisations required by the applicable regulations for use;
• installation and use of the machine in unsuitable premises;
• removal of or tampering with the monitoring and safety devices (guards, photocells, sensors, micro switches, etc.);
• removal of or tampering with the identification plate;
• removal of or tampering with the safety pictograms affixed to the machine;
• changes to the safety conditions established by the Manufacturer in the machine control software;
• misuse of the machine;
• use of the machine by untrained and/or unauthorised personnel or failure to comply with the required skills of the various
operators, as indicated in the manual;
• modifications or repairs made by the user without written authorisation from the Manufacturer;
• tampering with the machine’s electrical or compressed air circuits;
• partial or total failure to comply with the instructions;
• power supply faults (electrical, compressed air, etc.);
• failure to implement the maintenance plan of the machine;
• use of non-original spare parts or incorrectly ordering them;
• disposal of the machine not in compliance with the regulations in force;
• exceptional events such as floods, fire (if not caused by the machines).
IMPORTANT!
Further details may be contained in the sales contract.
The conditions set forth in the sales contract (if different) have priority over the contents of this section.
To Next Page
Loading...