3 Safety measures
3.1 Safety devices
To fully safeguard the operator and prevent access inside the machine while it is moving, the machine has been fitted with a
number of safety devices which, if they are activated, completely shut down the machine. The machine is designed and fitted with
safety systems to minimise risks for the operator.
The machine features the safety devices described in the table below. For the position of these devices, see the drawing on the
next pages.
CAUTION!
Due to the presence of spikes on the Rotary Discs, the operator could be exposed to the bruising and/or cutting
hazard in case of contact with them. Wear the appropriate P.P.E. when working near these Rotary Discs.
CAUTION!
In case of emergency, disconnect the power supply connected to the control panel to safely disable the Flexibowl®
controls.
These consist of fixed perimeter protections (casings), which have the function of
preventing access to the movements of the various machine parts during the operating
cycle and which can only be removed with specific tools.
It is located on the control panel and is used to cut off the power supply in the event of:
• danger to the operator’s safety;
• electrical hazard on the machine;
• mechanical or electrical operations on the machine.
To Next Page
Loading...