ARS Flexibowl 200 - Replacing the Flexibowl Rotary Disc

78 CHAPTER 7 - Maintenance
FlexiBowl® - Models 200 - 350 - 500 - 650 - 800
7.2.2 Replacing the Flexibowl® Rotary disc
The Flexibowl® Rotary Disc must be replaced according to the following conditions:
• at every format change: each component format may require a different Rotary Disc to be used;
• every 3 months: the Rotary Disc should be replaced every 3 months if used with particularly sharp components;
• yearly: in any case, it is recommended to replace the Rotary Disc at least once a year.
Proceed as follows to replace the Rotary Disc of the Flexibowl®:
Step
Action
Picture
1
Use an Allen key to unscrew the flange fixing screws
without removing them.
2
Turn the flange counterclockwise and remove it.
3
Remove the Rotary Disc and replace it.
4
Fit a new Rotary Disc on and tighten the fixing screws to 10
Nm.