CHAPTER 7 - Maintenance 75
Instructions for use and warnings
7.2.1 Checks and inspections
7.2.1.1 Routine maintenance table - checks
Check that the general pressure
regulator works properly.
Check that the safety devices work
properly.
Check the Rotary Disc conditions
before every start-up.
(Replace at least once a year)
Check for wear of the relays.
Check that the fuses works
properly.
Check for wear of the Flexibowl®.
(Replace completely according to the degree of wear)
Check that the solenoid valves work
properly.
(Completely replace every 2 years)
Checking for wear of the drill.
(Completely replace every year)
To Next Page
Loading...