ARS Flexibowl 200 - Replacing the Driver

CHAPTER 7 - Maintenance 87
Instructions for use and warnings
7.3.4 Replacing the Driver
REPLACING THE DRIVER
Operator qualification
Mechanical maintenance technician
PPE required
Tools to be used
Allen key
CAUTION!
Disconnect the power supply before taking the cover off.
Proceed as follows to replace the Driver:
Step
Action
Picture
1
Unplug the power cable from the control panel.
2
Take the cover off the Flexibowl®.
3
Remove the Driver connectors.
4
Unscrew the 2 fixing screws.
5
Insert the new Driver.
Note: the Driver will arrive with standard IP address
192.168.1.10 and Subnet mask 255.255.255.0.