ARS Flexibowl 200 - Inspection of Safety Devices; Checking for Wear of the Drill

76 CHAPTER 7 - Maintenance
FlexiBowl® - Models 200 - 350 - 500 - 650 - 800
7.2.1.2 Inspection of safety devices
Perform the following checks to ensure that the safety devices work properly:
Step
Action
1
Check that the machine covers are in place and fixed properly.
2
Check that the power cable is not damaged and/or worn
7.2.1.3 Checking for wear of the drill
Proceed as follows to check for wear of the drill:
Step
Action
Picture
1
Disconnect the power and air supply of the machine.
2
Take the cover off the Flexibowl®.
3
Visually check for wear of the drill.