INTRODUCTION
All rights reserved. No part of this publication may be reproduced, distributed, translated into other languages or transmitted by
any electronic or mechanical means, including photocopying, recording or any other storage and retrieval system, for any purposes
other than solely for the personal use of the buyer, without the express written permission of the Manufacturer.
The Manufacturer is in no way liable for the consequences resulting from any incorrect operations carried out by the user.
EDITOR’S NOTE
This documentation is specifically intended for technicians; therefore, some of the information that can easily be understood from
reading the texts and analysing the drawings might not be detailed further.
The Publisher is in no way responsible for the information and data in this manual: all of the information contained herein has
been provided, checked and approved by the Manufacturer.
The Publisher is in no way liable for the consequences resulting from any incorrect operations carried out by the user.
GENERAL REMARKS
All of the operating and maintenance instructions and recommendations described in this manual must be followed. To obtain the
best results, the Manufacturer recommends that the cleaning and maintenance operations be carried out regularly to keep the
system in perfect working order.
It is particularly important to train personnel in charge of the machine on its use, as well as on maintenance and monitoring
compliance with the operating procedures and with all of the safety regulations set forth in this manual.
Revision: 1.7
Edition: 04/2020
COPYRIGHT
© 2020 ARS S.r.l.
To Next Page
Loading...