ARS Flexibowl 200 - Page 43

CHAPTER 5 - Transport and Installation 43
Instructions for use and warnings
ELECTRICAL CONNECTION - AC
Operator qualification
Electrical maintenance technician
PPE required
Proceed as described below for connection to the mains - AC:
Step
Action
1
Connect the system to the power supply.
Note: the power cable is not supplied by ARS s.r.l.
2
Make sure the earthing system is installed correctly.
IMPORTANT!
The power supply range is 110 - 220 VAC +/-5%. CAUTION!
CAUTION!
An incorrect power supply can cause problems to the system and stop it from working properly.