ARS Flexibowl 200 - Page 54

54 CHAPTER 6 - Controls and use
FlexiBowl® - Models 200 - 350 - 500 - 650 - 800
For the Flexibowl® 500, 650 and 800, follow the instructions below to place the dip switch in a different position from the current one:
Step
Action
Picture
1
Unplug the power cable in the control panel
2
follow the procedure described in Chapter 7.3.1
(replacing the backlight) up to point 4
3
Use a flat screwdriver to select the position of the
correct dip switch
5
Reassemble all components