Artos CS-326 - View

42
Restore – This restores all the CS326 parts, jobs, and machine configuration data to a single
zipped file. See section “Data Restore”
Restore from old backup – If the backup to be restored was made in a very old version of the
CS326 software, the backup will consist of a group of directories rather than a single
zipped file. This function if for this type of backup.
Recover Folder Data- Not currently implemented.
Print Label – If you have the optional batch label printing system installed on the machine, you
can click this to print the label at any time during the batch. See section “LABEL
PRINTING OPTION” for labeling details.
Login as a different user – If you have the machine configured to have the operator log in. See
section “Machine Software Login” You can use this option to login as a different user.
Exit – Close the machine software
View
Production Log – This feature is currently not available.
Control Message – Not available.
Status Message – This is a list of functions performed by the HMI software and shut down
errors that have appeared on the screen. This is generally only used for software
development.
Display in Inch – If this is checked all dimensions will be displayed in inches. If this is not
checked all the dimensions are displayed in millimeters.
Display in English – When you have the software configured so that a language other than
English is being displayed, you can click this to temporally display all the screens other
than the main run screen, in English.
Select Font – You can change the size and style of all the characters displayed in the software.
This feature is especially useful if you want to display larger characters for operators with
poor eyesight. To change back to the font type that shipped originally with the software
you will need to edit the registry. The font key needs to be blank. Only an experienced
IT person should make this change.
Closeanyopenmachinesoftware

Toopentheregistryeditor,clickStart/Run/typein“regedit”andclickO.K.
Theregistryshouldbeexportedtoafilebeforemakingchangessothereissomehopeof
recoveringthecomputeriftheregistryisdamaged.Todothisclickfile–exportsavethefileto
amemorystickornetworkdrive.

TheregistrykeyfortheArtossoftwareis:
HKEY_LOCAL_MACHINE
SOFTWARE
  (directorynamevariesseeNote) 