98
BLADE REPLACEMENT
CAUTION: Stripping and cutting blades are very sharp. Do not handle sharp edges.
STRIPPING BLADE REPLACEMENT
(ONE AND TWO BLADE ASSEMBLIES)
The CS 326 B has a uniquely simple method of securing the stripping blades. To change stripping blades
in the single or pivoting toolholder open the cutterhead to the full open position using the “Manual
PIVOTING ( DOUBLE BLADE ) TOOLHOLDER
STRIPPING
BLADES
CUTOFF
BLADES
WIRE GUIDE
CLAMPING
SCREW
LOCK NUT
CUTOFF
BLADE
CLAMP
SCREWS
REMOVE THIS COVER
TO ACCESS CLAMP SCREW
CLAMPING
SCREW
LOCK NUT
SINGLE BLADE TOOLHOLDER
To Next Page
Loading...
