9
SPECIFICATIONS
A. WIRE CUT LENGTHS:
1. Maximum: 7874” (200M)
2. Minimum: .25” (6,4 mm
2
)
B. WIRE SIZE: (WIRE DEPENDENT)
Machine with standard wire guide kit
1. Maximum OD 0.5” (12,5mm) or
4AWG (25 mm
2
).
The maximum ID (inside
diameter) of the guides is 0.53
inches (13.4mm)
2. Minimum: 30 AWG (0,05mm2.)
The minimum ID of the guides
is 0.060 inches (1.52mm)
Machine with large wire guide kit
1. Maximum OD 0.63” (16,0mm) or
2AWG (34 mm
2
)
The maximum ID of the guides
is 0.69 inches (17.5mm)
2. Minimum: 30 AWG (0,05mm2.)
The minimum ID of the guides
is 0.060 inches (1.52mm)
C. STRIP LENGTHS:
1. Maximum: 39.37"(999 mm
2
)
Leading end
2. Minimum: 0.01” (.254 mm
2
)
D. MACHINE SIZE:
1. Length: 34” (863 mm
2
)
2. Width: 24..5” (622 mm
2
)
3. Height: 37..3” (952,5 mm
2
)/ 67.3 with
cart (1709,4 mm
2
)
E. MACHINE WEIGHT:
400 lbs. (182 Kg.) packed weight
F. Electrical
1. Power Supply:
115±10% or 230±10% VAC
47-63 Hz
Single Phase
0.4 kW (Nominal)
2. Connection to Supply:
Detachable cord
3. Protection Against Electric Shock
Grounded metal enclosure
G. Environmental
1. Temperature:
Operating 0°C to +45°C
Storage -25°C to +55°C
2. Relative Humidity:
30% to 95%
(Non- condensing)
3. Altitude:
Up to 4000 ft. MSL (1200 m MSL)
4. Sound Level
54 dbA quiescent
73 dbA automatic cycle
Other:
This equipment is designed for normal
operation in a dry location where it is not
likely to be subjected to drip, splash or
spray of water or other liquid
To Next Page
Loading...
