60
To edit the IO translation file.
‐ From the main menu in the CS326 software select Tools - IO Translation
‐ Select the text string you would like to translate.
‐ In the translation window type in the text you would like to see. Keep in mind that if you
use too long of a text string it may be cut off on when displayed in the software
‐ Press enter, to add the text string to the translation list.
The second method is to directly edit the language files.
The location of these files are listed in section “Translated text files”. There are two files for
each language open the file you wish to change in a text editor like Notepad. The file contains a
To Next Page
Loading...
