Ch. 10. Environmental Scanner Overview Sec. 10.1. Parts list
Itm Part # Item Description Qty Picture
4 290.106
#00 Phillips Screwdriver. Used
to replace the cantilever. See
Step 12 on page 134.
1
5 290.163
5/64” (2mm) Hex Driver. Used
to remove the cell body from the
scanner. See
Step 1 on page 166.
1
6* 080.165
1cc HSW Norm-Ject Syringe.
Typically used to perfuse fluid.
4
7* 080.010
5cc syringe, HSW. Typically
used for fluid or gas perfusion.
4
8 231.006
PFA Tubing, 1/16” OD, 0.040”
ID. 5 ft package. Special large
bore tubing for gas perfusion. .
IDEX part number 1503.
2
9* 231.028
FEP Tubing, 1/32” OD, .016”
ID. 5 ft package. Used for fluid
perfusion. . IDEX part number
1692. Note, all 4 sections are in
one container.
4
10 231.008
Luer Right fitting 1/16”. Used
for connecting tubing to
syringes. . IDEX number P-837.
4
The scale in the photos is in cm and mm.
DRAFT
Page 116
To Next Page
Loading...