ATAGO RX-7000 i User Manual

47
3. On the Serial port setup dialog box,
enter the settings as shown to the left
for the port number selected in step 1.
The serial settings are conformed to the
instrument settings.
4. Click Setup, and then Terminal port.
5. Enter the settings as shown to the left.
Click OK. Make sure that the "Local
echo" is checked.
※ Set "Parity" to "odd," and
"Flow control" to "none."

ATAGO RX-7000 i Specifications

General

Brand	ATAGO
Model	RX-7000 i
Category	Measuring Instruments
Language	English