90
8.3.1.2 Main Section
The Main Section of the screen varies depending on the stage of operations.
The Main Section can display vehicle identification selections, the main menu,
test data, messages, instructions and other diagnostic information.
8.3.2 Screen Messages
Screen messages appear when additional input is needed before proceeding.
There are mainly three main types of on-screen messages: Confirmation,
Warning, and Error.
8.3.2.1 Confirmation Messages
This type of messages usually displays as an “Information” screen, to inform
the user that a selected action cannot be reversed or when an action has
been initiated and confirmation is needed to continue.
When a user-response is not required to continue, the message displays
briefly.
8.3.2.2 Warning Messages
This type of messages displays a warning that a selected action may result
in an irreversible change or loss of data. An example of this type of message
is the “Erase Codes” message.
8.3.2.3 Error Messages
Error messages display when a system or procedural error has occurred.
Examples of possible errors include a disconnection or communication
interruption.
8.3.3 Making Selections
The Diagnostics application is a menu driven program that presents a series
of choices. As a selection is made, the next menu in the series displays. Each
selection narrows the focus and leads to the desired test. Tap the screen to
make menu selections.
To Next Page
Loading...
