106
9 Service
The Service section is specially designed to provide quick access to the
vehicle systems for various scheduled service and maintenance tasks. The
typical service operation screen is a series of menu driven executive
commands. Follow the on-screen instructions to select appropriate execution
options, enter correct values or data, and perform necessary actions. The
application will display detailed instructions to complete selected service
operations.
Currently, the following service functions are available:
⚫ Oil Reset Service
⚫ EPB Service
⚫ BMS Service
⚫ SAS Calibration Service
⚫ Other functions are available with update purchase
9.1 Oil Reset Service
Perform reset for the Engine Oil Life system, which calculates an optimal oil
life change interval depending on the vehicle driving conditions and climate.
The Oil Life Reminder must be reset each time the oil is changed, so the
system can calculate when the next oil change is required.
IMPORTANT
Always reset the engine oil life to 100% after every oil change.
NOTE
1. All required work must be carried out before the service indicators are
reset. Failure to do so may result in incorrect service values and cause
DTCs to be stored by the relevant control module.
2. For some vehicles, the scan tool can reset additional service lights such
as maintenance cycle and service interval. On BMW vehicles for
example, service resets include engine oil, spark plugs, front/rear brakes,
coolant, particle filter, brake fluid, micro filter, vehicle inspection, exhaust
To Next Page
Loading...
