40
Figure 4-18 Sample Programming Screen
4.5.1 Copy by OBD
If the IDs retrieved from sensor activation and those registered to the TPMS
ECU are different, use Copy by OBD to program the IDs saved in the ECU
to the new MX-Sensor.
By using this function, the tablet will program the sensor IDs retrieved from
the ECU of the test vehicle to the new MX-Sensors.
After the sensor ID is retrieved by performing diagnostics function. Select a
wheel location on the display and place a MX-Sensor in front of the tablet.
Tap Copy by OBD to program the new MX-Sensor.
To Next Page
Loading...
