Autel MAXITPMS ITS600PRO - Power Sources

62
② Status LED
③ Power LED
④ USB Port
⑤ Battery Clamp Cable
Table 6-1 LED Description
LED
Color
Description
Status LED
Flashing Green
The tester is communicating via USB
cable.
Flashing Blue
The tester is communicating via Bluetooth.
Flashing Red
Battery clamps are connected to the wrong
battery terminals.
Power LED
Solid Green
The tester is powered on and the battery is
sufficiently charged.
Flashing Green
The tester is charging. (Becomes solid
green when battery is fully charged.)
Solid Red
The device is in boot mode.
Flashing Red
The battery level is low. Please charge.
6.1.2 Power Sources
The BT506 tester can receive power from the following sources:
⚫ Internal Battery Pack
⚫ AC/DC Power Supply