76
7 OE Entry
7.1 TPMS by OEM Part No.
If the sensor's OEM part No. is known, this function is an efficient method to
activate all known TPMS sensors and program specifically the MX-Sensors.
Selecting the OEM part No. opens the functional page for performing sensor
activation and programming. Tap the Support tab, choose the vehicle model
of your preference, and then tap Enter Vehicle button at the bottom of the
screen to access the corresponding TPMS Service Menu and perform TPMS
service function.
7.1.1 Application Scenarios
The following are two typical scenarios in which this method is ideal.
7.1.1.1 In the workshop
If the mounted sensor is faulty and the part number is known to the technician,
the technician can use this method to check the original sensor, and then
write the information that was retrieved into a new MX-Sensor via
Programming. The newly programmed MX-Sensor is ready to replace the
original sensor and be installed on the vehicle.
7.1.1.2 In the tire shop
If a customer needs to replace one or more tires and sensors, or purchase a
large amount of sensors for one vehicle model and the OEM part No. of this
model is known, this function can be used to program up to 20 sensors at the
same time.
7.1.2 Function Operations
1. Tap OE Entry on the MaxiTPMS Job Menu. A list of sensor OEM sensor
manufacturers will display. Swipe up or down the screen to find the
manufacturer of the sensor on the test vehicle, and tap the manufacturer
To Next Page
Loading...
