130
V200 illuminates solid green. This signifies that the tablet is
connected to the MaxiVCI V200, and is ready to perform vehicle
diagnosis.
8. Tap the paired device again to unpair it.
9. Tap the Home icon on the top left to return to the MaxiTPMS Job
Menu.
NOTE
A MaxiVCI V200 can be paired to only one tablet at a time, and once it’s
paired, the device will not be discoverable to other devices.
11.4.2 Update via USB
When the V200 is connected with the tool using a Type-C to Type-C USB
cable, tap Firmware upgrade > Detect Firmware Version to check if an
update is available.
11.4.3 Update via Bluetooth
Please refer to Update via Bluetooth on page 130 for additional information.
11.5 System Settings
This function provides you with direct access to the system settings screen,
where you can adjust various system settings for the tablet, including wireless
and networks settings, various device settings such as sound, display, and
language settings.
11.6 Printer Manager
The Printer Manager function enables you to switch the way for report printing.
There are two printing methods available:
⚫ Printing via PC Link
⚫ Printing via Wi-Fi
To Next Page
Loading...
