20
4.2.1 Auto VIN Detect
Auto VIN Detect function is used to quickly identify the test vehicle. Before
operating, make sure a communication link is established between the test
vehicle and the tablet via the MaxiVCI V200. Refer to Establish Vehicle
Communication on page 31 for details.
Or, manually on the TPMS Service Menu and follow the onscreen instructions
to select the vehicle make, model and year. This function is compatible with
1998 and newer vehicles.
4.2.2 Scan License
Tap on the right side of the screen, the camera will be opened. Place
the tablet to align the license numbers within the scanning window, the result
displays in the Recognition result dialog box after scanned. Tap OK to confirm
the result. Once the license number is successfully detected, the screen will
automatically jump to the Vehicle Identification page with the license plate
scanned displays.
NOTE
The method of Scan License is supported in some countries and areas.
Please manual input the license numbers if it is not available.
To Next Page
Loading...
