128
➢ To connect the TBE device with the tablet via Wi-Fi direct mode
1. On the TBE device, tap Settings > Network connection. Connect
to Wi-Fi first and swipe the Wi-Fi direct toggle to turn the Wi-Fi direct
mode on.
2. On the tablet, tap Settings > TBE Manager to access the TBE
Manager screen.
3. Tap Scan at the upper right corner of the tablet's screen. The tablet
will automatically search for available TBE devices.
4. The name of the device will appear, select the device for connection.
Tap the device name to establish a communication link.
5. A message showing "Connect Successfully" displays after the
connection is established.
6. To disconnect the device, tap the connected device listing again.
7. Tap on the top left to return to the Settings Menu.
NOTE
To ensure quick connection, please perform this operation when the
ITS600/ITS600 Pro tablet is connected to a steady network.
11.4 VCI Manager
This application pairs the tablet with the MaxiVCI V200, checks the
communication status and updates the VCI firmware.
Figure 11-1 Sample VCI Manager Screen
To Next Page
Loading...
