Autel MAXITPMS ITS600PRO - Maxivci V200 Update; Update Via Bluetooth; Update Via USB

136
13.2 MaxiVCI V200 Update
Before updating the V200 software, ensure the tablet's network connection
to the Internet is stable. The V200 supports Bluetooth and USB
communications.
13.2.1 Update via Bluetooth
➢ To update the MaxiVCI V200 firmware via Bluetooth
1. Connect the V200 to the vehicle or charge it with an adapter before
pairing it with the tablet via Bluetooth.
2. On the MaxiTPMS Job Menu, tap Settings > VCI Manager, and
select the Bluetooth button on the top left corner of the screen. Pair
the tablet with V200 by tapping the device serial number on the
screen.
3. When pairing is successful, the connection status displays as
connected.
4. Tap Firmware upgrade > Detect Firmware to check if an update
for the V200 is available.
13.2.2 Update via USB
➢ To update the MaxiVCI V200 firmware via USB
1. Connect the V200 the tablet using a Type-C to Type-C USB cable
(not included in accessories).
2. Tap Firmware upgrade > Detect Firmware Version, the latest
version of the VCI firmware will display on the screen.
3. Complete the update if one is available.