105
8.6 Exiting Diagnostics
The Diagnostics application remains open as long as there is an active
communication with the vehicle. Exit the diagnostics operation interface to
stop all communications with the vehicle before closing the Diagnostics
application.
NOTE
Damage to the vehicle electronic control module (ECM) may occur if
communication is disrupted. Make sure all connections, such as USB cable
and wireless connection, are properly connected at all times during testing.
Exit all tests before disconnecting the test connection or powering down the
tool.
➢ To exit the Diagnostics application
1. From an active diagnostic screen, tap the Back or ESC function
button to exit a diagnostic session.
2. From the Vehicle Menu screen, tap the Home button on the top
toolbar; or tap the Back button on the navigation bar at the bottom
of the screen to exit the application directly and go back to the
MaxiTPMS Job Menu.
Now, the Diagnostics application is no longer communicating with the vehicle
and it is safe to open other MaxiTPMS applications.
To Next Page
Loading...
