Autel MAXITPMS ITS600PRO - Out-Vehicle Test; Battery Test

74
6.4 Out-vehicle Test
Out-vehicle test is used to test the condition of batteries that are not
connected to a vehicle. This function aims to check the health status of the
battery only. The battery types and standards able to be tested are as follows.
Types: FLOODED, AGM, AGM SPIRAL, EFB, and GEL
Standards: CCA, SAE, CA, EN, IEC, DIN, JIS and MCA
6.4.1 Battery Test
➢ To perform the out-vehicle battery test
1. Tap the Battery Test application on the MaxiTPMS main job menu.
The Battery test screen displays.
2. Select Out-vehicle Test (see Figure 6-4 Battery Test Screen).
3. Check the battery information and tap Start testing.
4. Wait for the battery test to complete and view the test results.
Figure 6-13 Sample Out-vehicle Test Screen