EasyManua.ls Logo

Autel MAXITPMS ITS600PRO - 8.2 Vehicle Identification Methods

Autel MAXITPMS ITS600PRO
173 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
73
Table 6-4 Generator Test Results
Result
Description
Charging Normal
The generator is good.
Output Too Low
The belt linking the starter and the generator is
loose;
The cable linking the starter and battery is loose
or corroded.
Output Too High
The generator is not properly connected to the
ground;
The voltage adjuster is broken and needs
replacement.
Ripple Too Large
The commutation diode is broken and needs repair
or replacement.
No Output
The cable is loose.
Some vehicles with power management
systems do not provide a path for charging due
to the sufficient load capacity of the battery;
The generator or the voltage adjuster is broken
and needs replacement.

Table of Contents

Related product manuals