88
8.2.3 Automatic Selection
The Auto Selection can be selected after selecting the test vehicle
manufacturer.
➢ To perform Automatic Selection
1. Tap the Diagnostics application button on the MaxiTPMS Job
Menu. The Vehicle Menu displays.
2. Tap the manufacturer menu of the test vehicle and then Automatic
Selection.
3. Once the vehicle information is confirmed, the VIN information is
automatically acquired. Follow the on-screen instructions to display
the diagnostic screen.
Figure 8-7 Sample Automatic Selection Screen
8.2.4 Manual Selection
When the vehicle's VIN is not automatically retrievable through the vehicle's
ECU, or the specific VIN is unknown, the vehicle can be manually selected.
This mode of vehicle identification is menu driven, repeat the first two steps
from the automatic selection operation and tap Manual Selection. Through
To Next Page
Loading...
