43
NOTE
Because the new IDs were created, relearn is necessary.
Figure 4-21 Sample Auto Create Diagram
4.6 TPMS Relearn
This function is used to transfer new sensor IDs into the vehicle ECU for
sensor recognition. Step-by-step relearn instructions are provided for all
supported vehicles. Relearn is needed when the new sensor IDs are different
from the original sensor IDs stored within TPMS ECU.
Three major methods are available for relearn process. According to the
actual situation, perform the most suitable TPMS relearn method.
⚫ OBD Relearn
⚫ Automatic Relearn
⚫ Stationary Relearn
To Next Page
Loading...
