92
Figure 8-9 Sample Auto Scan Operation Screen
① Main Section
② Function Buttons
Main Section
Column 1 – displays the system numbers.
Column 2 – displays the scanned systems.
Column 3 – displays the diagnostic indicators describing test results. These
indicators are defined as follows:
-!-: Indicates that the scanned system may not support the code reading
function, or there is a communication error between the tester and the
control system.
-?-: Indicates that the vehicle control system has been detected, but the
tester cannot accurately locate it.
Fault | #: Indicates there is/are detected fault code(s) present; “#”
indicates the number of the detected faults.
Pass | No Fault: Indicates the system has passed the scanning process
and no fault has been detected.
Column 4 – to perform further diagnosis or testing on a specific system item,
tap on the to the right of that item. A Function Menu screen will display.
To Next Page
Loading...
