53
NOTE
A prompt will display when tap open the Tire Tread function, notifying the current check
mode and if want to switch to another one. You can also switch between All tread check
and Single check in the Check Settings via the TBE device.)
6. The measurement data on the TBE device will automatically
transfer to and display on the paired tablet.
7. To switch to Brake disc or Quick check, take Quick check for
example, simply open the Quick check application on the TBE
device to perform measurements.
The Data Query function on the TBE device stores data of the previous
measurement session, which will display on the tablet screen automatically.
Once a new measuring session starts, the previous data will naturally be
replaced by the newly tested one.
NOTE
Once paired, tire & brake disc wear condition, DOT, and other tire-related
information will be automatically transferred from TBE device to the paired
tablet.
Figure 4-31 Sample All Tread Check Screen
To Next Page
Loading...
