78
3. When a specific OEM part No. is selected, the screen will display as
pictured below.
Figure 7-3 Sample OEM Part No. Service Menu
NOTE
Only sensor Check and Programming functions are available. The
Diagnosis and Relearn functions can only be accessed by selecting a
vehicle on the TPMS service menu.
7.1.2.1 Check
The Check tab is the default selection on this menu. Tap Trigger on the
bottom left of the screen to activate the original sensors and retrieve the
sensor information. The original sensor ID, tire pressure, tire temperature,
sensor battery, and sensor frequency will populate the displayed table.
NOTE
You can change the unit on the table header according to your preference.
To Next Page
Loading...
