Enabling global AES using EDM
Use the following procedure to enable energy saving for the switch.
Procedure
1. From the navigation tree, double-click Power Management.
2. In the Power Management tree, double-click Energy Saver.
3. In the work area, click the Energy Saver Globals tab.
4. Select the EnergySaverEnabled check box.
5. On the toolbar, click Apply.
6. On the toolbar, you can click Refresh to update the work area data display.
Energy Saver Globals field descriptions
Use the data in the following table to use the Energy Saver Globals tab.
Name Description
EnergySaverEnabled Enables or disables energy saving for the switch.
PoePowerSavingEnabled Enables or disables AES PoE power save mode for
the switch.
EfficiencyModeEnabled Enables or disables AES efficiency mode for the
switch.
EnergySaverActive Activates or deactivates the Avaya Energy Saver.
Disabling global AES using EDM
Use the following procedure to disable energy saving for the switch.
Procedure
1. From the navigation tree, double-click Power Management.
2. In the Power Management tree, double-click Energy Saver.
3. In the work area, click the Energy Saver Globals tab.
4. Clear the EnergySaverEnabled check box.
5. Click Apply.
6. On the toolbar, you can click Refresh to update the work area data display.
Enabling global AES PoE power save mode using EDM
Use the following procedure to enable AES PoE power save mode for the switch.
When enabled, AES PoE power save mode provides the capability to control power consumption
savings for only ports that have AES enabled, and PoE priority configured to low.
Configuring the switch using EDM
July 2015 Getting Started with Avaya ERS 3500 Series 141
Comments on this document? infodev@avaya.com
To Next Page
Loading...
