Before you begin
• Disable AES globally.
Procedure
1. From the navigation tree, double-click Power Management.
2. In the Power Management tree, double-click Energy Saver.
3. In the work area, click the Energy Saver Globals tab.
4. Select the PoePowerSavingEnabled check box.
5. Click Apply.
6. On the toolbar, you can click Refresh to update the work area data display.
Disabling global AES PoE power save mode using EDM
Use the following procedure to disable AES PoE power save mode for the switch.
When enabled, AES PoE power save mode provides the capability to control power consumption
savings for only ports that have AES enabled, and PoE priority configured to low.
Before you begin
• Disable AES globally.
Procedure
1. From the navigation tree, double-click Power Management.
2. In the Power Management tree, double-click Energy Saver.
3. In the work area, click the Energy Saver Globals tab.
4. Clear the PoePowerSavingEnabled check box.
5. Click Apply.
6. On the toolbar, you can click Refresh to update the work area data display.
Enabling AES efficiency mode using EDM
Use the following procedure to enable AES efficiency mode for the switch.
When enabled, AES efficiency mode enables AES globally and for each port, enables AES PoE
power save mode, and configures AES scheduling to predetermined values (on time 18:00 and off
time 07:30 daily).
Important:
AES efficiency mode overrides custom AES scheduling and PoE power saving mode. You will
be prompted to confirm that you want to enable AES efficiency mode before proceeding.
Before you begin
• Disable AES globally.
Configuring the switch using EDM
142 Getting Started with Avaya ERS 3500 Series July 2015
Comments on this document? infodev@avaya.com
To Next Page
Loading...
