34. Navigate to VLANs Settings tab and change VlanConfigControl to autopvid.
35. Modify VLANs 3 and 4 so that ports 13 – 24 are included in both VLANs .
Controlling traffic to and from the two VLAN assigned to ports 13 - 24.
36. Select the Ports tab.
37. Select Ports 13 - 24.
38. Set the default VLAN value.
VLAN 4 is the Data VLAN
39. Select the tagging method of untagPvidOnly to send all untagged packets to the PC.
When the phone receives packets from the network, it will forward all packets not belonging
to VLAN 3 to the connected PC.
40. Apply Selection.
41. Click Apply .
42. Done
Configuring VLANs for voice and data
July 2015 Getting Started with Avaya ERS 3500 Series 161
Comments on this document? infodev@avaya.com
To Next Page
Loading...
