Wednesday 11:00 Activate
Friday 14:00 Activate
Viewing AES energy saving using ACLI
Use the following procedure to review the switch capacity energy saving (Watts) and the PoE
energy saving (Watts).
Procedure
1. Log on to ACLI to enter User EXEC mode.
2. View AES savings.
show energy-saver savings
Important:
If a switch is reset while energy-saver is activated, the PoE power saving calculation
may not accurately reflect the power saving, and in some cases may display zero
savings. This is because the switch did not have sufficient time to record PoE usage
between the reset of the switch and energy-saver being reactivated. When energy saver
is next activated, the PoE power saving calculation will be correctly updated.
Example
The following example displays sample output for the show energy-saver savings command.
Switch> show energy-saver savings
Unit # Model Switch Capacity Saving PoE Saving
------ ----- ---------------------- ----------
1 3524GT-PWR 0.0 watts 0.0 watts
------------------------------------------------------------------
TOTAL 0.0 watts 0.0 watts
==================================================================
Viewing the global AES configuration using ACLI
Use the following procedure to review the AES configuration for the switch.
Procedure
1. Log on to ACLI to enter User EXEC mode.
2. View the global AES configuration
show energy-saver
Example
The following example displays sample output for the show energy-saver command.
Switch> show energy-saver
Avaya Energy Saver (AES): Enabled
AES PoE Power Saving Mode: Enabled
AES Efficiency-Mode Mode: Disabled
Day/Time: Thursday 13:33:53
Current AES state: AES is Inactive
Configuring the switch using ACLI
July 2015 Getting Started with Avaya ERS 3500 Series 89
Comments on this document? infodev@avaya.com
To Next Page
Loading...
