Configuring AES scheduling to default using ACLI
Use the following procedure to completely disable scheduling for the switch or to disable specific
energy saver schedules.
Before you begin
• Disable AES globally.
Procedure
1. Enter Global Configuration mode:
enable
configure terminal
2. Configure AES scheduling.
default energy-saver schedule
Variable definitions
The following table defines optional parameters that you can enter after the default energy-
saver schedule command.
Variable Value
friday|monday|saturday|sunday|thursday|tuesday|
wednesday
Configures AES scheduling for a specific day to
default (disabled).
weekday Configures AES scheduling for all weekdays to
default (disabled).
weekend Configures AES scheduling for Saturday and Sunday
to default (disabled).
<hh:mm> Specifies the scheduled AES start time (hour and
minutes).
Viewing AES scheduling using ACLI
Use the following procedure to review configured energy saving schedule information.
Procedure
1. Log on to ACLI to enter User EXEC mode.
2. View AES schedule.
show energy-saver schedule
Example
The following example displays sample output for the show energy-saver schedule command.
switch> show energy-saver schedule
Day Time Action
--- ---- ------
Monday 08:00 Activate
Configuring the switch using ACLI
88 Getting Started with Avaya ERS 3500 Series July 2015
Comments on this document? infodev@avaya.com
To Next Page
Loading...
