DDT; Reviewed:
SPOC 10/18/2017
Solution & Interoperability Test Lab Application Notes
©2017 Avaya Inc. All Rights Reserved.
Step 4 - On Page 6 of the form, verify that the Processor Ethernet field is set to y.
6.2. System-Parameters Features
Step 1 - Enter the display system-parameters features command. On Page 1 of the form, verify
that the Trunk-to-Trunk Transfer is set to all.
change system-parameters features Page 1 of 19
FEATURE-RELATED SYSTEM PARAMETERS
Self Station Display Enabled? y
Trunk-to-Trunk Transfer: all
Automatic Callback with Called Party Queuing? n
Automatic Callback - No Answer Timeout Interval (rings): 3
Call Park Timeout Interval (minutes): 10
Off-Premises Tone Detect Timeout Interval (seconds): 20
AAR/ARS Dial Tone Required? y
Music (or Silence) on Transferred Trunk Calls? all
DID/Tie/ISDN/SIP Intercept Treatment: attendant
Internal Auto-Answer of Attd-Extended/Transferred Calls: transferred
Automatic Circuit Assurance (ACA) Enabled? n
Abbreviated Dial Programming by Assigned Lists? n
Auto Abbreviated/Delayed Transition Interval (rings): 2
Protocol for Caller ID Analog Terminals: Bellcore
Display Calling Number for Room to Room Caller ID Calls? n
display system-parameters customer-options Page 6 of 12
OPTIONAL FEATURES
Multinational Locations? n Station and Trunk MSP? y
Multiple Level Precedence & Preemption? n Station as Virtual Extension? y
Multiple Locations? n
System Management Data Transfer? n
Personal Station Access (PSA)? y Tenant Partitioning? y
PNC Duplication? n Terminal Trans. Init. (TTI)? y
Port Network Support? y Time of Day Routing? y
Posted Messages? y TN2501 VAL Maximum Capacity? y
Uniform Dialing Plan? y
Private Networking? y Usage Allocation Enhancements? y
Processor and System MSP? y
Processor Ethernet? y Wideband Switching? y
Wireless? n
Remote Office? y
Restrict Call Forward Off Net? y
Secondary Data Module? y
To Next Page
Loading...
Need help?
General
