DDT; Reviewed:
SPOC 10/18/2017
Solution & Interoperability Test Lab Application Notes
©2017 Avaya Inc. All Rights Reserved.
6. Configure Avaya Aura® Communication Manager Release 7.1
This section illustrates an example configuration allowing SIP signaling via the “Processor
Ethernet” of Communication Manager to Session Manager.
Note – The initial installation, configuration, and licensing of the Avaya servers and media
gateways for Communication Manager are assumed to have been previously completed and are not
discussed in these Application Notes. Consult [5] - [9] for further details.
6.1. Verify Licensed Features
Note – This section describes steps to verify Communication Manager feature settings that are
required for the reference configuration described in these Application Notes. Depending on access
privileges and licensing, some or all of the following settings might only be viewed, and not
modified. If any of the required features are not set, and cannot be configured, contact an
authorized Avaya account representative to obtain the necessary licenses/access.
Step 1 - Enter the display system-parameters customer-options command. On Page 2 of the
form, verify that the Maximum Administered SIP Trunks number is sufficient for the
number of expected SIP trunks.
display system-parameters customer-options Page 2 of 12
OPTIONAL FEATURES
IP PORT CAPACITIES USED
Maximum Administered H.323 Trunks: 4000 0
Maximum Concurrently Registered IP Stations: 2400 1
Maximum Administered Remote Office Trunks: 4000 0
Maximum Concurrently Registered Remote Office Stations: 2400 0
Maximum Concurrently Registered IP eCons: 68 0
Max Concur Registered Unauthenticated H.323 Stations: 100 0
Maximum Video Capable Stations: 2400 3
Maximum Video Capable IP Softphones: 2400 10
Maximum Administered SIP Trunks: 4000 60
Maximum Administered Ad-hoc Video Conferencing Ports: 4000 0
Maximum Number of DS1 Boards with Echo Cancellation: 80 0
To Next Page
Loading...
