DDT; Reviewed:
SPOC 10/18/2017
Solution & Interoperability Test Lab Application Notes
©2017 Avaya Inc. All Rights Reserved.
7. Configure Avaya Session Border Controller for Enterprise
Release 7.2
These Application Notes assume that the installation of the Avaya SBCE and the assignment of all
IP addresses have already been completed, including the management IP address. Consult [10] and
[11] for additional information.
In the sample configuration, the management IP is 10.64.90.50. Access the web management
interface by entering https://<ip-address> where <ip-address> is the management IP address
assigned during installation. Log in with the appropriate credentials. Click Log In.
The main page of the Avaya SBCE will appear. Note that the installed software version is
displayed. Verify that the License State is “OK”. The SBCE will only operate for a short time
without a valid license. Contact your Avaya representative to obtain a license.
Note – The provisioning described in the following sections use the menu options listed in the left-
hand column shown below.
To Next Page
Loading...
