DDT; Reviewed:
SPOC 10/18/2017
Solution & Interoperability Test Lab Application Notes
©2017 Avaya Inc. All Rights Reserved.
Step 3 - On the Advanced window, enter the following:
Select SIP Provider Interwk (created in Section 7.3.2), for Interworking Profile.
Select remove Contact parameter (created in Section 7.3.3) for Signaling Manipulation
Script.
Select Finish (not shown).
7.3.6 Routing – To Session Manager
This provisioning defines the Routing Profile for the connection to Session Manager.
Step 1 - Select Global Profiles Routing from the left-hand menu, and select Add (not shown)
Step 2 - Enter a Profile Name: (e.g., route to SM) and click Next.
Step 3 - The Routing Profile window will open. Using the default values shown, click on Add.
Step 4 - The Next-Hop Address window will open. Populate the following fields:
Priority/Weight = 1
Server Configuration = EnterpriseCallServer (from Section 7.3.4).
Next Hop Address: Verify that the 10.64.91.11:5061 (TLS) entry from the drop down
menu is selected (Session Manager IP address). Also note that the Transport field is
grayed out.
Click on Finish.
To Next Page
Loading...
