Avaya Aura Communication Manager 7.1 - Server Flows

To Next Page

To Previous Page

DDT; Reviewed:

SPOC 10/18/2017

Solution & Interoperability Test Lab Application Notes

81 of 95

CM71SM71-VzIPCC

7.5.4 Server Flows – For Session Manager

Step 1 - Select Device Specific Settings  Endpoint Flows from the menu on the left-hand side

(not shown).

Step 2 - Select the Server Flows tab (not shown).

Step 3 - Select Add, (not shown) and enter the following:

 Flow Name: Vz enterprise side.

 Server Configuration: EnterpriseCallServer (Section 7.3.4).

 URI Group: *

 Transport: *

 Remote Subnet: *

 Received Interface: Vz-sig (Section 7.5.3).

 Signaling Interface: Inside-sig-50 (Section 7.5.3).

 Media Interface: Inside-Med-50 (Section 7.5.2).

 End Point Policy Group: enterprise-sip-trunk (Section 7.4.4).

 Routing Profile: route to Vz IPCC (Section 7.3.7).

 Topology Hiding Profile: Enterprise-Topology (Section 7.3.8).

 Let other values default.

Step 4 - Click Finish (not shown).

Avaya Aura Communication Manager 7.1 - Server Flows - for Session Manager