DDT; Reviewed:
SPOC 10/18/2017
Solution & Interoperability Test Lab Application Notes
©2017 Avaya Inc. All Rights Reserved.
Note – Since TLS transport is specified in Step 3, then the Enable Grooming option
should be enabled.
7.3.5 Server Configuration – Verizon
Repeat the steps in Section 7.3.4, with the following changes, to create a Server Configuration for
the Avaya SBCE connection to Verizon.
Step 1 - Select Add and enter a Profile Name (e.g., Verizon IPCC) and select Next (not shown).
Step 2 - On the General window, enter the following:
Server Type: Select Trunk Server
IP Address: 172.30.205.55 (Verizon-provided IP address)
Transport: Select UDP
Port: 5072
Select Next until the Advanced tab is reached
To Next Page
Loading...
