Avaya Aura Communication Manager 7.1 - Server Configuration

To Next Page

To Previous Page

DDT; Reviewed:

SPOC 10/18/2017

Solution & Interoperability Test Lab Application Notes

67 of 95

CM71SM71-VzIPCC

7.3.4 Server Configuration – Session Manager

This section defines the Server Configuration for the Avaya SBCE connection to Session Manager.

Step 1 - Select Global Profiles  Server Configuration from the left-hand menu.

Step 2 - Select Add Profile and the Profile Name window will open. Enter a Profile Name (e.g.,

EnterpriseCallServer) and click Next.

Step 3 - The Add Server Configuration Profile window will open.

 Select Server Type: Call Server

 SIP Domain: Leave blank (default)

 TLS Client Profile: Select the profile create in Section 7.2.3 (e.g., Inside-Client)

 IP Address: 10.64.91.11 (Session Manager network IP address)

 Transport: Select TLS

 Port: 5061

 Select Next

Step 4 - The Authentication and Heartbeat windows will open (not shown).

 Select Next to accept default values

Step 5 - The Advanced window will open.

 Select Enterprise Interwork (created in Section 7.3.1), for Interworking Profile

 Check Enable Grooming

 In the Signaling Manipulation Script field select none

 Select Finish

Avaya Aura Communication Manager 7.1 - Server Configuration - Session Manager