DDT; Reviewed:
SPOC 10/18/2017
Solution & Interoperability Test Lab Application Notes
©2017 Avaya Inc. All Rights Reserved.
Step 4 - On Communication Manager, enter the add media-server x command where x is an
available Media Server identifier (e.g., 1). Enter the following parameters:
Signaling Group – Enter the signaling group previously configured for Media Server
(e.g., 60).
Voip Channel License Limit – Enter the number of VoIP channels for this Media
Server (based on licensing) (e.g., 300).
Dedicated Voip Channel Licenses – Enter the number of VoIP channels licensed to
this Media Server (e.g., 300)
Remaining fields are automatically populated based on the signaling group
provisioning for the Media Server.
6.16. Save Translations
After the Communication Manager provisioning is completed, enter the command save
translation.
6.17. Verify TLS Certificates – Communication Manager
Note – Testing was done with System Manager signed identity certificates. The procedure to
create and obtain these certificates is outside the scope of these Application Notes.
add media-server 1 Page 1 of 1
MEDIA SERVER
Media Server ID: 1
Signaling Group: 60
Voip Channel License Limit: 300
Dedicated Voip Channel Licenses: 300
Node Name: AMS
Network Region: 1
Location: 1
Announcement Storage Area: ANNC-be99ad1a-1f39-41e5-ba04-000c29f8f3f3
add signaling-group 60 Page 1 of 2
SIGNALING GROUP
Group Number: 60 Group Type: sip
Transport Method: tls
Peer Detection Enabled? n Peer Server: AMS
Near-end Node Name: procr Far-end Node Name: AMS
Near-end Listen Port: 5060 Far-end Listen Port: 5060
Far-end Network Region: 1
Far-end Domain: 10.64.91.60
To Next Page
Loading...
