Contents
10 Migrating to the Avaya S8700 or S8710 Media Server
June 2004
Task list 120
• On the S8500 Media Server 122
Clear the ARP cache on the laptop 122
Connect to the media server 122
Access the media server 123
Clear alarms 123
Start a SAT session 123
Check link status 123
Record all busyouts 123
Check clock synchronization 124
Disable scheduled maintenance 124
Check for translation corruption 124
Back up the translation files 124
• On first S8710 Media Server 124
Power up the media server 125
Access the media server 125
Set up Telnet (if necessary) 125
Install Communication Manager 126
Access the media server 127
Check software version 127
Copy files to the media server (if any) 128
Configure the media server using AIW 128
Restore the translations 129
• On second S8710 Media Server 129
Install Communication Manager 129
Connect duplication cables 129
Move Ethernet cables 129
Connect new cables to standby media server 130
Move the cables 130
• On the standby S8710 Media Server 130
Access the standby media server 130
Ping all the connections to the media server 130
Release the standby media server 130
Back up files on the media server 131
Release alarm suppression (optional) 132
Set the Product ID 132
Log off all administration applications 132
Disconnect from the media server 132
To Next Page
Loading...
