Contents
Migrating to the Avaya S8700 or S8710 Media Server 7
June 2004
Restore translation files 45
Connecting to the standby media server 46
Connecting to the active media server 46
Installing the translations 46
Adding IPSI translations to Communication Manager 47
Adding IPSI information 48
Setting IPSI duplication (high/critical reliability only) 49
Setting alarm activation level 50
Backing up translations 51
• Migrating hardware 53
DEFINITY ECS R or SI in an MCC 53
DEFINITY ECS SI in an SCC 54
DEFINITY ECS CSI or DEFINITY ONE/S8100 in a CMC 55
Avaya IP600 55
• Upgrading and administering the existing hardware 56
Connecting media server and IPSI cables to Ethernet switch(es) 56
Upgrading hardware in each port network 57
Replacing tone clocks with IPSI circuit packs
and replace maintenance circuit packs 57
Determining IPSI placement in port networks 57
Standard (simplex) reliability configuration 58
High or critical reliability configuration (MCC1) 61
Connecting the CAT5 cables to the IPSI circuit packs 63
High or critical reliability configuration (SCC1) 64
Ordering information 71
Connecting the CAT5 cables to the IPSI circuit packs 72
Installing Expansion Interface circuit packs 76
Completing circuit pack replacement 77
• Converting a processor port network to a port network 78
Preconversion administration (R, SI, CSI) 78
Connecting to the processor 79
Verifying system status 79
Recording all busyouts 79
Note node names and IP addresses 79
Saving translations 79
Preconversion administration (S8100) 80
Connecting to the processor 80
Note node names and IP addresses 80
To Next Page
Loading...
