Contents
8 Migrating to the Avaya S8700 or S8710 Media Server
June 2004
Saving translations 80
Note IP settings 81
• Converting a processor port network to a port network (MCC) 82
Verifying hardware 82
Removing the processor port network control carrier(s) 83
Installing the expansion control carrier and port carrier 84
Installing IPSI and maintenance circuit packs 84
Connecting the CAT5 cables to the IPSI circuit packs 84
Installing Expansion Interface circuit packs 85
Powering up the media gateway(s) 85
• Converting a processor port network to a port network (SCC) 86
Verifying hardware 86
Removing the processor port network control cabinet 87
Installing the expansion control media gateway 88
Stacking the port media gateways 88
Installing IPSI and maintenance circuit packs 88
Connecting the CAT5 cables to the IPSI circuit packs 88
Installing Expansion Interface circuit packs 88
Powering up the media gateway(s) 89
• Migrating from a DEFINITY ECS R or SI 90
Verifying hardware 90
Migrating MCC or SCC to G650 Media Gateways 95
Powering down the cabinets 95
Removing the circuit packs 96
Placing circuit packs into G650 Media Gateway 97
Connecting trunks to PSTN 97
Connecting the G650 Media Gateways to the Main Distribution Frame 97
Connecting to the media server 97
• Converting a processor port network to a port network (CMC) 98
Verifying hardware 98
Converting the control cabinet to a port network 99
Powering down the control cabinet 100
Replacing the processor circuit pack 100
Replacing the TN799C C-LAN circuit pack (if necessary) 100
Adding TN2302AP IP Media Processor 101
Installing TN771 Maintenance/Test 101
Connecting to the media server 101
To Next Page
Loading...
