Installing the Avaya S8700 Media Server with an Avaya G650 Media Gateway 125
December 2003
Figure 37: Duplex- or high-reliability CSS-connected PN1 with one switch node
Connecting critical reliability CSS-connected
PN1 with one switch node
Figure 38, Critical-reliability CSS-connected PN1 with one switch node, on page 126 shows typical fiber
optic cabling between media gateways. The cable between port slots 1 and 2 on each switch node is a
metallic cable (H600-278).
Connect the two groups of 1 to 15 cables between PN1 and each of the other PNs in an alternating port
slot order: 20, 3; 19, 4; 18, 5; and so forth.
Figure notes
1 Media Gateway 1 (PN1 with 1 Switch Node)
2 Port Networks 2 through 16
3 H600-278 Metallic Cable
4 To other port networks
B
E
C
D
A
B
E
C
D
A
cadfdup KLC 031202
To Next Page
Loading...
