Avaya S8700 - Installing the G650 Media Gateway

64 Installing the Avaya S8700 Media Server with an Avaya G650 Media Gateway
December 2003
Installing the G650 Media Gateway
Perform these tasks to install the G650 Media Gateway port network:
• Checking circuit packs on page 67
• Checking the ventilation and the G650 Media Gateway rack on page 69
• Setting the carrier address ID on page 70
• Mounting one G650 Media Gateway on page 72
• Mounting two to five G650 Media Gateways on page 76
• Installing the TN2312BP IPSI adapter on page 76
• Approved ground on page 77
• Connecting the G650 Media Gateway grounds and other grounds on page 77
• AC power on page 79
• DC power on page 81
• Uninterruptible power supply on page 82
• G650 Media Gateway power switch on page 83
Table 1, Comcodes for the G650,
on page 64 shows the list of equipment and their comcodes for the
G650.
Table 1: Comcodes for the G650 1 of 4
Comcode Description
Included
in basic
cabinet
Optional
FRU
700259724 G650 cabinet (includes one 655A power supply) Yes No Yes
105631527 Bus terminators (AHF110 circuit packs) for an A
carrier
Yes Must have one
bus terminator
for each G650
or G650 stack
Yes
405289547 Cabinet feet for an A carrier mounted on the floor Yes No Yes
840059885 Cabinet feet screws for an A carrier mounted on the
floor
Yes No Yes
700260359 TN2312BP IP server interface circuit pack Yes No Yes
700055015 TN799DP CLAN Yes No Yes
108774696 TN2302AP IP media processor Yes No Yes
848525887 IP media processor adapter (TN2302, TN799DP) No No Yes
102631413 259A adapter for C-LAN (TN799C) No No Yes
700252638 DC feed power cable (Cable from the customer’s DC
plant to the cabinet backplane. Defaults to 30 feet in
length)
Yes No
1
Yes
405362641 AC power cord—Domestic (USA, Canada, Mexico,
Japan, and much of the Caribbean)
Yes No
1
Yes